Obtaining a Certificate of Occupancy for Fire and Life safety \u2013 one of several certificates of occupancy required for new buildings \u2013 is a complex process designed to ensure suitable systems are in place to save lives. Whether you\u2019re a general contractor or property manager, navigating the process is easier when you know what to anticipate. This two-part series offers an overview of the process and tips to avoid delays and earn a certificate of occupancy for fire and life safety.<\/p>\n
<\/p>\n
The fire alarm installation and monitoring company, or technology integrator, is ultimately responsible for bringing the fire alarm system to code. They typically work under the electrical contractor, who works under the general contractor.<\/p>\n
Reputable fire alarm installers adhere to the following process and best practices.<\/p>\n
<\/p>\n
The fire alarm installer requests two types of permits, a fire alarm permit, and an electrical permit.<\/p>\n
The city Authority Having Jurisdiction (AHJ) issues the fire alarm permit. Typically, the installer works with the AHJ during the design phase to ensure the system meets state and local requirements.<\/p>\n
Depending on the jurisdiction, the local AHJ or a state inspector issues the electrical permit. It\u2019s the same inspection either way, and local staffing limitations may play a role in that decision.<\/p>\n
<\/p>\n
Once the installer obtains fire alarm and electrical permits, they\u2019ll install cabling and back boxes for fire alarm devices throughout the building. Cabling must meet standards outlined in the National Electric Code (NEC), Article 760.<\/p>\n
Next, the electrical inspector completes a rough-in inspection while the cabling is still visible. Once approved, general contractors begin finishing work such as drywalling, painting, and wallpapering.<\/p>\n
<\/p>\n
After the general contractor has finished the walls, the fire alarm installation company:<\/p>\n
Once installation and programming are complete, the panel will report \u201cSystem Normal.\u201d<\/p>\n
The fire alarm contractor also creates as-built drawings \u2013 blueprints that include device locations, cable routes, and device and circuit addresses. If the control panel reports an issue, the as-built drawings will indicate where to find it.<\/p>\n
<\/p>\n
The fire alarm contractor doesn\u2019t install elevator and sprinkler systems, but they coordinate with those contractors and guide necessary integration with the fire alarm system to make sure all systems function correctly in the case of a fire event.<\/p>\n
For fire department access, the fire alarm system must communicate a fire event to elevator machinery, sending it to a designated floor \u2013 also known as an ultimate recall location. If the fire blocks access to that floor, elevator cars go to an alternate floor. Firefighters can also use a fire service key to override elevator programming. Contractors test these features alongside a state elevator inspector.<\/p>\n
The installer also ensures every water flow device communicates with the fire alarm panel and central monitoring station. They test tamper switches and on\/off valves, plus monitor valves to ensure they\u2019re not closed if there is a fire event.<\/p>\n
<\/p>\n
After device installation, the fire alarm installer pre-tests the system to make sure it will:<\/p>\n
The pre-test includes checking every installed fire alarm device to ensure proper function, including audio and visual communication.<\/p>\n
<\/p>\n
Once the fire alarm installer confirms the system works as intended, they\u2019ll test it with the AHJ \u2013 usually within two to three days. Typically, the fire alarm, sprinkler, and mechanical contractors will be present.<\/p>\n
The fire inspector approves the system and signs both the permit and a record of completion. The fire alarm installer and a building representative also sign the record of completion. The representative is often the general contractor, but it could be the building manager or owner. At this point, the fire and life safety certificate of occupancy is issued.<\/p>\n
With the certificate of occupancy secured, the fire alarm installer places a document enclosure at every fire alarm panel. The documentation includes records of completion, as-built drawings, owner and operator manuals, and a copy of the fire alarm system program (often on a flash drive).<\/p>\n
Finally, the installer trains the user to operate the fire alarm panel.<\/p>\n
<\/p>\n